Last weekend I attained a "life target" that had been sitting at the bottom of my mind for years and years, gathering dust and becoming mouldy but never objectionable enough to throw out.
I gained my motor-cycle learner's permit!
I'd always wanted to own and ride a motorbike but had never actually done anything about it.
All it needed to prompt me into action was my son going for his license over a month ago and then buying a lovely learner-legal 1980's Yamaha "Renaissa" cafe-racer bike. A great little machine and not often seen on the "For Sale" sites.
(That's Drew's bike, below).
(Photo Sony DSC-F717)
So I made a booking for the compulsory 9-hour (4.5 hours per day) learner's training session which is run here in the ACT by "Stay Upright" under contract to the Territory's government.
On Saturday 8th. and Sunday 9th. August I joined 10 others at the training site and had a ball......tiring at times, but good fun all round.
The Sutton Road training area is near Queanbeyan and was once the driver training facility for the Australian Federal Police. There is a closed-circuit track and also a skid-pan.
The facility is now used by various organisations for motorbike education, advanced driver training (cars), heavy-vehicle training (trucks, forklifts etc) and to train Commonwealth-car drivers in evasive driving tactics.
This is the motor-cycle training area.......
(Photo from Nokia phone)
I was the eldest.....by the length of the home straight! Most of the others were half my age.
Three females, eight males. Two male trainers (Andy and John). Nine Honda CB250's and two Yamaha Scorpio's. Helmets and gloves were provided for the course.
Here's me and my Honda. No, I'm not wearing an astronaut's skull-cap under the helmet....it's a compulsory hair-net!
(Photo from Nokia phone)
At the end of the weekend only one person had failed to pass all modules so ten of us were handed our certificates and on the Monday I got myself off to the motor registry, handed over my certificate and was awarded with a rider's endorsement (restricted) on my driver's license.
It was a great feeling.
This past week has been a matter of (a) buying protective equipment and (b) selecting and buying a suitable motorbike, both of which have been accomplished.
The equipment acquired so far consists of the most important (and expensive) item - the helmet, and suitable gloves.
Next on the PPE front will be boots and jacket.
The bike was a harder choice.
I would have loved to have bought something along the lines of the type bought by my son but my 63-year old back and joints might just have a bit of a gripe about being in a bent-forward position most of the time!
So I then leaned (pun intended) towards the cruiser style, finally settling on the Yamaha Virago 250cc (learner-legal) and as late as this afternoon it was just a matter of selecting which one to make an offer for.
But then I saw this.........
(from Ebay)
A 1980 Honda CM400A, with 2-speed semi-automatic gearbox.
"So what?", you say. "A frumpy automatic...why not buy a scooter?!"
Well, this old bloke chose this bike (which I've bought from another "old bloke" in Melbourne) for a couple of good reasons....well, to me they were good reasons:-
I gained my motor-cycle learner's permit!
I'd always wanted to own and ride a motorbike but had never actually done anything about it.
All it needed to prompt me into action was my son going for his license over a month ago and then buying a lovely learner-legal 1980's Yamaha "Renaissa" cafe-racer bike. A great little machine and not often seen on the "For Sale" sites.
(That's Drew's bike, below).
(Photo Sony DSC-F717)
So I made a booking for the compulsory 9-hour (4.5 hours per day) learner's training session which is run here in the ACT by "Stay Upright" under contract to the Territory's government.
On Saturday 8th. and Sunday 9th. August I joined 10 others at the training site and had a ball......tiring at times, but good fun all round.
The Sutton Road training area is near Queanbeyan and was once the driver training facility for the Australian Federal Police. There is a closed-circuit track and also a skid-pan.
The facility is now used by various organisations for motorbike education, advanced driver training (cars), heavy-vehicle training (trucks, forklifts etc) and to train Commonwealth-car drivers in evasive driving tactics.
This is the motor-cycle training area.......
(Photo from Nokia phone)
I was the eldest.....by the length of the home straight! Most of the others were half my age.
Three females, eight males. Two male trainers (Andy and John). Nine Honda CB250's and two Yamaha Scorpio's. Helmets and gloves were provided for the course.
Here's me and my Honda. No, I'm not wearing an astronaut's skull-cap under the helmet....it's a compulsory hair-net!
(Photo from Nokia phone)
At the end of the weekend only one person had failed to pass all modules so ten of us were handed our certificates and on the Monday I got myself off to the motor registry, handed over my certificate and was awarded with a rider's endorsement (restricted) on my driver's license.
It was a great feeling.
This past week has been a matter of (a) buying protective equipment and (b) selecting and buying a suitable motorbike, both of which have been accomplished.
The equipment acquired so far consists of the most important (and expensive) item - the helmet, and suitable gloves.
Next on the PPE front will be boots and jacket.
The bike was a harder choice.
I would have loved to have bought something along the lines of the type bought by my son but my 63-year old back and joints might just have a bit of a gripe about being in a bent-forward position most of the time!
So I then leaned (pun intended) towards the cruiser style, finally settling on the Yamaha Virago 250cc (learner-legal) and as late as this afternoon it was just a matter of selecting which one to make an offer for.
But then I saw this.........
(from Ebay)
A 1980 Honda CM400A, with 2-speed semi-automatic gearbox.
"So what?", you say. "A frumpy automatic...why not buy a scooter?!"
Well, this old bloke chose this bike (which I've bought from another "old bloke" in Melbourne) for a couple of good reasons....well, to me they were good reasons:-
- Late 1970's/early 1980's....yet with both electric & kick-start, disk brakes and alloy wheels.
- Its rarity in Australia. They were never sold here, yet share most mechanical bits with the CB400 series, which were available in Down Under.
- Semi-automatic gear-changing makes for one less thing (clutch operation) for me to concentrate on when learning out there in the big world.
- The larger engine (400 cc) is learner-legal yet capable of maintaining posted highway cruising speeds.
- The included "stuff" with the sale....a top-box for the back, a screen already fitted, spare starter, spare light and some additional bits 'n' pieces, including manual.
- Price. At $2,000 it was less than half what I was looking at for a Virago. If nothing else, I'm not going to be a whole heap of money down the tubes if I don't like the bike or bike-riding.
Now, if you would like to see how a pristine example presents, have a look at this on YouTube.
I should have mine arrive later this coming week, all being well. Can't wait!
I should have mine arrive later this coming week, all being well. Can't wait!
Great thoughts you got there, believe I may possibly try just some of it throughout my daily life.
ReplyDeletemotorbikes sale melbourne
Go for it!
ReplyDelete